Jaguar XJS (4.0L) 1994 Radio Pinout and Wiring Diagram — Stereo Wire Colours
CD Head Unit · Standard ICE · 1994

On the Jaguar XJS (4.0L) of 1994 the CD Head Unit sits on connector LB160. The constant 12 V feed is pin 11 (P), the ignition switched feed is pin 10 (WU), the illumination feed is pin 12 (RK). Wire colours are Jaguar factory codes.
- Constant 12 V — LB160 pin 11, P
- Ignition switched — LB160 pin 10, WU
- Illumination — LB160 pin 12, RK
Which model years this covers
This pinout covers the XJS (4.0L) of 1994. One table serves every one of those years: within a head unit generation the connector and the wire colours do not change.
Radio connector pinout
LB160 head unit
| # | Colour | Circuit | |
|---|---|---|---|
| 1 | BW | LEFT FRONT SPEAKER | |
| 2 | B | LEFT FRONT SPEAKER | |
| 4 | YG | ANTENNA DELAY RELAY: coil feed | |
| 5 | B | LEFT REAR SPEAKER | |
| 6 | BR | LEFT REAR SPEAKER | |
| 7 | B | RIGHT FRONT SPEAKER | |
| 9 | BW | RIGHT FRONT SPEAKER | |
| 10 | WU | IGNITION SWITCHED POWER SUPPLY: B+ (fuse 27) | |
| 11 | P | BATTERY POWER SUPPLY: B+ (fuse 9, through a choke) | |
| 12 | RK | ILLUMINATION: LOCATE LIGHTING | |
| 13 | BR | RIGHT REAR SPEAKER | |
| 14 | B | RIGHT REAR SPEAKER |
Wire colour codes
| Code | Colour |
|---|---|
| B | Black |
| G | Green |
| K | Pink |
| P | Purple |
| R | Red |
| U | Blue |
| W | White |
| Y | Yellow |
A two-letter code is base colour then tracer: NW is brown with a white tracer.
Speaker wire colours
| Channel | Pin | Code | Colour | |
|---|---|---|---|---|
| LEFT FRONT SPEAKER | LB160 1 | BW | Black with White tracer | |
| LEFT FRONT SPEAKER | LB160 2 | B | Black | |
| LEFT REAR SPEAKER | LB160 5 | B | Black | |
| LEFT REAR SPEAKER | LB160 6 | BR | Black with Red tracer | |
| RIGHT FRONT SPEAKER | LB160 7 | B | Black | |
| RIGHT FRONT SPEAKER | LB160 9 | BW | Black with White tracer | |
| RIGHT REAR SPEAKER | LB160 13 | BR | Black with Red tracer | |
| RIGHT REAR SPEAKER | LB160 14 | B | Black |
Common questions
Which wire is the 12 V constant on the XJS (4.0L) radio connector?
LB160 pin 11, wire colour P (Purple). It stays live with the key out: this is the memory feed.
Which wire is the ignition switched live on the XJS (4.0L)?
LB160 pin 10, wire colour WU (White with Blue tracer). It goes live with the ignition and is what tells the head unit to switch on.
Which wire is the illumination feed on the XJS (4.0L)?
LB160 pin 12, wire colour RK (Red with Pink tracer). It follows the panel lights and dims with them.
What are the speaker wire colours on the XJS (4.0L)?
LEFT FRONT SPEAKER — pin 1, BW; LEFT FRONT SPEAKER — pin 2, B; LEFT REAR SPEAKER — pin 5, B; LEFT REAR SPEAKER — pin 6, BR; RIGHT FRONT SPEAKER — pin 7, B; RIGHT FRONT SPEAKER — pin 9, BW; RIGHT REAR SPEAKER — pin 13, BR; RIGHT REAR SPEAKER — pin 14, B.
What connector does the XJS (4.0L) head unit use?
The head unit sits on LB160. Jaguar colour codes are not the aftermarket standard, so match an adapter by pin number, not by wire colour.
Notes and caveats
No ground pin. LB160 carries no ground. The radio grounds from its case straight to the chassis.
* Pins 3, 8. No wire on these terminals.
One terminal is unnumbered. Between pins 13 and 4 a black wire leaves the head unit with no terminal number printed against it. It is omitted rather than guessed.
Speaker polarity. Not marked.
CD auto changer. On its own connector, RH170, not on LB160.
Not sure of the model year? Decode your VIN — on this car it decides which head unit you have.